Description
CASTROL Transmax Axle Long Life 75W-90 previously Syntrax Long Life 75W-90
Axle Fluid – Multivehicle
Performance, Features & Benefits of CASTROL Transmax Axle Long Life 75W-90 are:
- Fuel savings and reduced emissions due to balanced viscometric and frictional characteritics.
- Superior low temperature fluidity ensures optimum protection at start up under all conditions
- Excellent thermal and oxidative stability maintains final drive and differential cleanliness which permits extended oil drain intervals and decreased servicing.
- Optimal anti-wear, extreme pressure performance at all ambient temperatures and load conditions.
- Excellent temperature reduction and shear stability enhance final drive performance and extends component life.
Product Performance Claims CASTROL Transmax Axle Long Life 75W-90 are:
- API GL-5
- MAN 342 Typ S1
- Scania STO 1:0
- ZF TE-ML 05A,12B,17B,19C,21A
- BMW (Non LS Rear Axles)
If you have any questions, please contact Procare Technical Helpdesk
Product Description CASTROL Transmax Axle Long Life 75W-90
Castrol Transmax Axle Long Life 75W-90 is a full synthetic multigrade final drive lubricant. It is Castrol’s prime recommendation for final drives in heavy commercial vehicles, and is approved by MAN, Scania and ZF. Specially designed and approved by BMW for use in all BMW final drives fitted with conventional (non limited slip) differentials.
Typical Characteristics
| Product specifications : | CASTROL Transmax Axle Long Life 75W-90 | |
| Density @ 15C, Relative g/ml | ASTM D1298 | 0.858 |
| Appearance | Visual | Clear & Bright |
| Viscosity, Kinematic 40C mm²/s | ASTM D445 | 101 |
| Viscosity, Kinematic 100C mm²/s | ASTM D445 | 15.4 |
| Viscosity Index | ASTM D2270-93 | 161 |
| Viscosity, Brookfield @ -40C mPa.s (cP) | ASTM D2983 | 50400 |
| Pour Point °C | ASTM D97 | -57 |
| Flash Point, COC °C | ASTM D92 | 224 |
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.
